6.25 Inch Polished Gold Cabinet Pulls | MARBLE
6.25 Inch Polished Gold Cabinet Pulls | MARBLE
6.25 Inch Polished Gold Cabinet Pulls | MARBLE
6.25 Inch Polished Gold Cabinet Pulls | MARBLE
6.25 Inch Polished Gold Cabinet Pulls | MARBLE
6.25 Inch Polished Gold Cabinet Pulls | MARBLE
6.25 Inch Polished Gold Cabinet Pulls | MARBLE
6.25 Inch Polished Gold Cabinet Pulls | MARBLE
6.25 Inch Polished Gold Cabinet Pulls | MARBLE
6.25 Inch Polished Gold Cabinet Pulls | MARBLE
6.25 Inch Polished Gold Cabinet Pulls | MARBLE
6.25 Inch Polished Gold Cabinet Pulls | MARBLE
6.25 Inch Polished Gold Cabinet Pulls | MARBLE
6.25 Inch Polished Gold Cabinet Pulls | MARBLE
6.25 Inch Polished Gold Cabinet Pulls | MARBLE
6.25 Inch Polished Gold Cabinet Pulls | MARBLE
6.25 Inch Polished Gold Cabinet Pulls | MARBLE
6.25 Inch Polished Gold Cabinet Pulls | MARBLE
6.25 Inch Polished Gold Cabinet Pulls | MARBLE
6.25 Inch Polished Gold Cabinet Pulls | MARBLE
6.25 Inch Polished Gold Cabinet Pulls | MARBLE
6.25 Inch Polished Gold Cabinet Pulls | MARBLE

MARBLE - Polished Gold 6.25" Knobs and Pulls

$35.00
/
Tax included. Shipping calculated at checkout.

Sold individually — price is for one piece. Styling photos may show a pair.

The Marble is the 6.25" polished gold bar pull for primary island drawer fronts — workhorse size in the mirror-finish island specification.

The maintenance reality, stated plainly: polished gold is lacquered (not PVD). Lacquer wears with hand contact, concentrated at the grip zone — the central 60% of the bar where the palm meets it on each opening. Island pulls see many more daily touches than perimeter, so grip-zone lacquer wears faster. Horizon: perimeter PG holds 8 to 12 years before re-coat; island PG, 5 to 8 years. The trade-off for mirror finish on a working kitchen island.

The 160mm center-to-center fits primary island drawer fronts at 22" to 28" — the daily-access bank where the maintenance discussion matters most.

Specifications

  • Material: Solid brass
  • Finish: Polished Gold (lacquered)
  • Type: Bar Pull
  • Hole Spacing (C/C): 6.25 inch (160mm)
  • Overall Length: Approx. 7.25 inch (184mm)
  • Projection: 1.25 inch (32mm)
  • Mounting: Standard screws included

Best fit: primary island drawer banks at 22" to 28". Step down to the Onyx 5", up to the Quartz 7.5". For the same 6.25" on navy perimeter, the Flux 6.25" shares the finish.

Wipe with a soft dry cloth. Avoid abrasive cleaners to preserve the lacquered finish.

Fit & installation
Back-mounted, with mounting screws included. The screws suit standard drawer fronts and doors from 1/2 to 1 1/2 inches thick; for thicker or thinner panels, a longer or shorter screw is available at any hardware store. Drill a 3/16-inch hole at each marked center, fit the screw from behind, and hand-tighten until snug. With daily use, hardware can work loose over time — an occasional re-tighten keeps it solid.

Care
Soft cloth only; wipe dry after any contact with water. No abrasives.

SHIPPING
Every order ships with tracking — you'll get a link by email once it's on its way. Orders arrive to US addresses in about 15–18 days. Shipping is free on orders over $150; under that, the rate shows at checkout.

RETURNS
Changed your mind? Send it back within 30 days of delivery.

→ Return shipping is covered by the buyer.

Hardware should be unused and in its original packaging. Once it reaches us, we refund your original payment, usually within a few business days. To start, email hello@archandles.com with your order number and we'll send the steps.

QUESTIONS
Email hello@archandles.com — a real person reads every message.

You may also like