7.5 Inch Brushed Gold Cabinet Pulls | PANEL
7.5 Inch Brushed Gold Cabinet Pulls | PANEL
7.5 Inch Brushed Gold Cabinet Pulls | PANEL
7.5 Inch Brushed Gold Cabinet Pulls | PANEL
7.5 Inch Brushed Gold Cabinet Pulls | PANEL
7.5 Inch Brushed Gold Cabinet Pulls | PANEL
7.5 Inch Brushed Gold Cabinet Pulls | PANEL
7.5 Inch Brushed Gold Cabinet Pulls | PANEL
7.5 Inch Brushed Gold Cabinet Pulls | PANEL
7.5 Inch Brushed Gold Cabinet Pulls | PANEL
7.5 Inch Brushed Gold Cabinet Pulls | PANEL

PANEL - Brushed Gold 7.5" Knobs and Pulls

Regular price$21.00
/
Tax included. Shipping calculated at checkout.

Sold individually — price is for one piece. Styling photos may show a pair.

The Panel is the 7.5" brushed gold bar pull for primary island drawer fronts — the proportional center of the island range, fitted to 26" to 32" drawer widths. The size where champagne gold on navy stops being accent and starts being signature.

What separates champagne gold from yellow gold on an American island: appliance compatibility. Most US kitchens run stainless steel — refrigerator, range, dishwasher — which reads as cool/neutral metal. Yellow gold next to stainless reads as a temperature mismatch. Champagne gold's slight platinum undercast bridges to stainless without fighting it. For kitchens that aren't paneled-appliance-only, this is the spec that lets gold hardware sit alongside the cooktop without conflict.

The 192mm center-to-center carries the warm horizontal across the navy face at the room's most prominent hardware position.

Specifications

  • Material: Solid brass
  • Finish: Brushed Gold (lacquer sealed)
  • Type: Bar Pull
  • Hole Spacing (C/C): 7.5 inch (192mm)
  • Overall Length: Approx. 9.76 inch (248mm)
  • Projection: 1.25 inch (32mm) from cabinet face
  • Mounting: Standard through-bolt; hardware included

Best fit: primary island drawer fronts at 26" to 32". Step down to the Contour 6.25", up to the Slab 10". For the same 7.5" on walnut perimeter, the Zephyr 7.5" shares the finish.

Wipe with a soft dry cloth. Avoid abrasive cleaners to preserve the PVD finish.

Fit & installation
Back-mounted, with mounting screws included. The screws suit standard drawer fronts and doors from 1/2 to 1 1/2 inches thick; for thicker or thinner panels, a longer or shorter screw is available at any hardware store. Drill a 3/16-inch hole at each marked center, fit the screw from behind, and hand-tighten until snug. With daily use, hardware can work loose over time — an occasional re-tighten keeps it solid.

Care
Wipe with a soft cloth and mild soap. Skip solvents, abrasives and furniture polish. The lacquered finish holds its tone — no polishing needed.

SHIPPING
Every order ships with tracking — you'll get a link by email once it's on its way. Orders arrive to US addresses in about 15–18 days. Shipping is free on orders over $150; under that, the rate shows at checkout.

RETURNS
Changed your mind? Send it back within 30 days of delivery.

→ Return shipping is covered by the buyer.

Hardware should be unused and in its original packaging. Once it reaches us, we refund your original payment, usually within a few business days. To start, email hello@archandles.com with your order number and we'll send the steps.

QUESTIONS
Email hello@archandles.com — a real person reads every message.

You may also like