Two long vertical cabinet handles in an antique brass finish, shown side by side against a plain white background.
Four long vertical cabinet handles in an antique brass finish, shown on a white four-door cabinet or door front.
Four cabinet handles in a distressed brass or bronze finish, shown on white doors in a clean studio-style product presentation.
Two matching brass cabinet handles with decorative turned ends and round backplates, shown mounted on white drawer fronts.
An antique brass cabinet pull handle with ornate turned details and decorative finials on both ends, shown horizontally against a plain white background.
MOUNT - Antique Brass 3.75" Knobs and Pulls
MOUNT - Antique Brass 3.75" Knobs and Pulls
MOUNT - Antique Brass 3.75" Knobs and Pulls
MOUNT - Antique Brass 3.75" Knobs and Pulls
MOUNT - Antique Brass 3.75" Knobs and Pulls
MOUNT - Antique Brass 3.75" Knobs and Pulls
MOUNT - Antique Brass 3.75" Knobs and Pulls
Three brass cabinet handles with dimension labels on a white background. The top row shows a round knob labeled A and B, 30mm in diameter, 32mm high, with a width of 30mm.
Two long vertical cabinet handles in an antique brass finish, shown side by side against a plain white background.
Four long vertical cabinet handles in an antique brass finish, shown on a white four-door cabinet or door front.
Four cabinet handles in a distressed brass or bronze finish, shown on white doors in a clean studio-style product presentation.
Two matching brass cabinet handles with decorative turned ends and round backplates, shown mounted on white drawer fronts.
An antique brass cabinet pull handle with ornate turned details and decorative finials on both ends, shown horizontally against a plain white background.
MOUNT - Antique Brass 3.75" Knobs and Pulls
MOUNT - Antique Brass 3.75" Knobs and Pulls
MOUNT - Antique Brass 3.75" Knobs and Pulls
MOUNT - Antique Brass 3.75" Knobs and Pulls
MOUNT - Antique Brass 3.75" Knobs and Pulls
MOUNT - Antique Brass 3.75" Knobs and Pulls
MOUNT - Antique Brass 3.75" Knobs and Pulls
Three brass cabinet handles with dimension labels on a white background. The top row shows a round knob labeled A and B, 30mm in diameter, 32mm high, with a width of 30mm.

MOUNT - Antique Brass 3.75" Knobs and Pulls

$12.00
/
Tax included. Shipping calculated at checkout.

Sold individually — price is for one piece. Styling photos may show a pair.

The Mount is the 3.75" antique brass bar pull for white Shaker bath vanity drawers in farmhouse, transitional, and vintage-inspired specifications — the most personal finish in the catalog.

Antique brass is a character-led finish, not a durability finish. Hand-applied patina deepens with bath-level humidity over years rather than degrading. Where every other bath finish is built for consistency, this one is built for ongoing change. The honest comparison: choose this if you want the bathroom to age visibly with the household; choose any other finish if you want it to look the same in ten years. Pair with warm character-led plumbing — unlacquered brass faucets, oil-rubbed bronze, aged bronze. Pairing with chrome or polished nickel creates tonal conflict that reads unresolved.

The 96mm center-to-center fits standard vanity drawers under 18" wide.

Specifications

  • Material: Solid brass
  • Finish: Antique Brass
  • Type: Bar Pull
  • Hole Spacing (C/C): 3.75 inch (96mm)
  • Overall Length: Approx. 6.2 inch (159mm)
  • Projection: 1.25 inch (32mm)
  • Mounting: Standard screws included

Best fit: powder rooms, primary baths, and farmhouse bath specifications where the finish is meant to evolve with the room. For a warm sibling that develops patina more slowly, see the Spine 3.75" in unlacquered brushed brass. For the same antique brass on kitchen perimeter cabinetry, the Halo 3.75" shares the patina character; step up to the Gleam 5" for wider kitchen drawers in the same finish.

Wipe gently with a dry cloth only. Avoid cleaning products that may strip the intentional patina.

Fit & installation
Back-mounted, with mounting screws included. The screws suit standard drawer fronts and doors from 1/2 to 1 1/2 inches thick; for thicker or thinner panels, a longer or shorter screw is available at any hardware store. Drill a 3/16-inch hole at each marked center, fit the screw from behind, and hand-tighten until snug. With daily use, hardware can work loose over time — an occasional re-tighten keeps it solid.

Care
Soft cloth and a mild, damp wipe. Avoid solvents that strip the finish.

SHIPPING
Every order ships with tracking — you'll get a link by email once it's on its way. Orders arrive to US addresses in about 15–18 days. Shipping is free on orders over $150; under that, the rate shows at checkout.

RETURNS
Changed your mind? Send it back within 30 days of delivery.

→ Return shipping is covered by the buyer.

Hardware should be unused and in its original packaging. Once it reaches us, we refund your original payment, usually within a few business days. To start, email hello@archandles.com with your order number and we'll send the steps.

QUESTIONS
Email hello@archandles.com — a real person reads every message.

You may also like