The Dawn is the 6.25" matte black bar pull for base cabinet drawers — sized so the grip zone falls toward the center of an 18" to 24" door face rather than at the outer stile edge. On a standard base drawer used many times a day, that position changes how the pull behaves under load.
When a pull is fixed near the outer corner of a drawer face, the pulling force creates torsional stress on the screw farthest from the grip — the side that has to resist the rotation as the drawer comes open. A pull centered on the drawer face distributes that load between both screws evenly. Over years of daily kitchen use, that distribution is the difference between hardware that stays tight and hardware that needs re-tightening every season.
The thermally bonded powder-coat delivers consistent color across the full surface — no hot spots under direct light, no loss of depth under ambient. Across a full base run, the pulls create a horizontal rhythm that reads the lower cabinet line as a single composed element rather than a series of doors with handles added.
Specifications
-
Material: Solid Brass
-
Finish: Matte Black — thermally bonded powder-coat, consistent color under all lighting
-
Type: Bar Pull
-
Overall Length: 198mm (7.8″)
-
Projection: 32mm (1.3″)
-
Hole Spacing (C/C): 160mm (6.25″)
-
Weight: 98g
-
Mounting: M4 screws (25mm and 38mm), included
Best fit: base cabinet drawer fronts 18" to 24" across any cabinet color — white Shaker, slab, painted dark, two-tone, frameless. Pair with the Radiant 5" on upper cabinet doors; step up to the Dusk 7.5" for wide-format island drawers. For antique brass at the same size on greige cabinetry, see the Glint 6.25".
In the Box
1× Dawn Matte Black Pull, 2× M4 machine screws (25mm), 2× M4 machine screws (38mm). Standard configuration — if your door thickness requires a different screw length, contact us before ordering.
Clean with a soft damp cloth. Avoid scouring pads or chemical solvents.
