ECHO — Polished Gold 3.75" Knobs and Pulls

The Echo is a polished gold bar pull at 3.75" hole centers — sized small, finished loud. At upper-cabinet eye-line, the mirror face of polished brass picks up ceiling fixtures, under-cabinet strip lighting, and direct window light and returns it across the upper run. The hardware does not just sit on the cabinet face; it functions as a secondary light source distributing warmth down to the prep zone.

Solid brass mechanically polished to mirror grade and sealed with protective lacquer. The lacquer is what separates this finish from heritage unlacquered polished brass: unlacquered polished brass develops a yellow shift and surface dulling within 18 months of kitchen exposure as airborne oils and humidity oxidize the surface. The sealed version holds its mirror-grade reflectivity unchanged through years of kitchen use.

At 3.75" on uppers, this finish does not allow the hardware to recede. The choice when the kitchen has a deliberate jewelry-grade hardware program — not as accent, but as a light-active element working alongside cabinetry, countertop, and lighting design.

Specifications

• Material: Solid Brass
• Finish: Polished Gold — mirror-grade surface, lacquer protected
• Type: Bar Pull
• Overall Length: 130mm (5.1″)
• Projection: 32mm (1.3″)
• Hole Spacing (C/C): 95mm (3.75″)
• Weight: 68g
• Mounting: M4 screws (25mm and 38mm), included

Best fit: upper kitchen cabinets, spice pull-outs, narrow base drawers under 18", and pull-out trash fronts on cabinetry where the design intent includes a high-reflectivity hardware program. Pair with the Pulse 5" on base drawers or the Flux 6.25" for full kitchen programs. For brushed gold PVD at the same size, see the Vapor 3.75".

In the Box

1× Echo Polished Gold Pull, 2× M4 machine screws (25mm), 2× M4 machine screws (38mm). Standard configuration — if your door thickness requires a different screw length, contact us before ordering.

Wipe with a soft dry cloth only. Avoid abrasive cleaners and direct moisture contact on the lacquered surface.

Fit & installation
Back-mounted, with mounting screws included. The screws suit standard drawer fronts and doors from 1/2 to 1 1/2 inches thick; for thicker or thinner panels, a longer or shorter screw is available at any hardware store. Drill a 3/16-inch hole at each marked center, fit the screw from behind, and hand-tighten until snug. With daily use, hardware can work loose over time — an occasional re-tighten keeps it solid.

Care
Soft cloth only; wipe dry after any contact with water. No abrasives.

SHIPPING
Every order ships with tracking — you'll get a link by email once it's on its way. Orders arrive to US addresses in about 15–18 days. Shipping is free on orders over $150; under that, the rate shows at checkout.

RETURNS
Changed your mind? Send it back within 30 days of delivery.

→ Return shipping is covered by the buyer.

Hardware should be unused and in its original packaging. Once it reaches us, we refund your original payment, usually within a few business days. To start, email hello@archandles.com with your order number and we'll send the steps.

QUESTIONS
Email hello@archandles.com — a real person reads every message.