6.25 Inch Brushed Brass Cabinet Pulls | HAZE
HAZE - Brushed Brass 6.25" Cabinet Pulls
HAZE - Brushed Brass 6.25" Cabinet Pulls
HAZE - Brushed Brass 6.25" Cabinet Pulls
HAZE - Brushed Brass 6.25" Cabinet Pulls
HAZE - Brushed Brass 6.25" Cabinet Pulls
HAZE - Brushed Brass 6.25" Cabinet Pulls
HAZE - Brushed Brass 6.25" Cabinet Pulls
HAZE - Brushed Brass 6.25" Cabinet Pulls
HAZE - Brushed Brass 6.25" Cabinet Pulls
HAZE - Brushed Brass 6.25" Cabinet Pulls
HAZE - Brushed Brass 6.25" Cabinet Pulls
HAZE - Brushed Brass 6.25" Cabinet Pulls
HAZE - Brushed Brass 6.25" Cabinet Pulls
HAZE - Brushed Brass 6.25" Cabinet Pulls
HAZE - Brushed Brass 6.25" Cabinet Pulls
HAZE - Brushed Brass 6.25" Cabinet Pulls
HAZE - Brushed Brass 6.25" Cabinet Pulls
HAZE - Brushed Brass 6.25" Cabinet Pulls

HAZE - Brushed Brass 6.25" Cabinet Pulls

Regular price$18.00
/
Tax included. Shipping calculated at checkout.

Sold individually — price is for one piece. Styling photos may show a pair.

At 6.25" hole centers, the Haze is the base-cabinet pull for drawer fronts in the 18" to 24" range — the size where the hardware fills the panel with correct visual weight without a longer bar's dominance over the door face.

On white Shaker cabinetry, this scale earns its place geometrically. The Shaker stile-and-rail frames a flat center panel; the 6.25" pull runs parallel to the bottom rail and matches its proportional language. The brushed brass grain catches light along the same horizontal axis as the rail itself, so hardware and door read as one detail rather than two layered objects.

This is the base-cabinet size most US cabinet makers spec by default for a 21" or 24" drawer front. Choosing it consistently across the base run is the move that takes a Shaker kitchen from "white cabinetry with brass hardware" to one resolved object.

Specifications

  • Material: Solid Brass
  • Finish: Brushed Brass — directional brushed grain, lacquer-coated
  • Type: Bar Pull
  • Overall Length: 198mm (7.8″)
  • Projection: 32mm (1.3″)
  • Hole Spacing (C/C): 160mm (6.25″)
  • Weight: 98g
  • Mounting: M4 screws (25mm and 38mm), included

Best fit: base cabinet drawer fronts 18" to 24", white Shaker kitchens, raised-panel cabinetry where hardware needs to rhyme with the door geometry. Pair with the Lume 5" on uppers for a two-size pull program across the full kitchen; step up to the Mist 7.5" for island and wide-format drawers.

In the Box

1× Haze Brushed Brass Pull, 2× M4 machine screws (25mm), 2× M4 machine screws (38mm). Standard configuration — if your door thickness requires a different screw length, contact us before ordering.

Wipe with a soft dry cloth. Avoid abrasive cleaners to preserve the lacquered finish.

Fit & installation
Back-mounted, with mounting screws included. The screws suit standard drawer fronts and doors from 1/2 to 1 1/2 inches thick; for thicker or thinner panels, a longer or shorter screw is available at any hardware store. Drill a 3/16-inch hole at each marked center, fit the screw from behind, and hand-tighten until snug. With daily use, hardware can work loose over time — an occasional re-tighten keeps it solid.

Care
Wipe with a soft cloth and mild soap. Skip solvents, abrasives and furniture polish. The lacquered finish holds its tone — no polishing needed.

SHIPPING
Every order ships with tracking — you'll get a link by email once it's on its way. Orders arrive to US addresses in about 15–18 days. Shipping is free on orders over $150; under that, the rate shows at checkout.

RETURNS
Changed your mind? Send it back within 30 days of delivery.

→ Return shipping is covered by the buyer.

Hardware should be unused and in its original packaging. Once it reaches us, we refund your original payment, usually within a few business days. To start, email hello@archandles.com with your order number and we'll send the steps.

QUESTIONS
Email hello@archandles.com — a real person reads every message.

You may also like